gd-0017.jpg   gd-0017.jpg

 Cable & HF - Connectors

      since 1961     CEO. M. Kusch

 

Ecoflex 10 Plus - made in Germany

 

Homeeng

coaxcable connectors assembly accessories Anfahrt Impressum Terms of use Kontakt

 

data sheet of Ecoflec 10 Plus

Ecoflex 10 Plus is a flexible, low-loss coaxial cable specifically designed for use up to 8 GHz. Advanced manufacturing techniques combined with the use of a low-loss PE-LLC dielectric yields a foaming rate of more than 70%. This results in very
low attenuation. Ecoflex 10 Plus sets standards among flexible coaxial cables. The high flexibility of Ecoflex 10 Plus is guaranteed by a 7-wire Hybrid inner conductor with aluminium core and welded copper shield. Use of proprietary techniques, continuous center conductor calibration and compression as well as the application of a precoating results in low losses and good impedance matching. Further advantages of the cable include the use of double shielding, which is constructed of overlapping copper foil plus an additional tight woven copper braid.

A screening efficiency of > 90 dB @ 1 GHz is realized. The copper foil has an applied PE coating, which prevents foil cracking due to short radius bends. The black PVC sheath of Ecoflex 10 Plus is UV stabilized. In addition to a full compliment of standard connectors, an easy to use solder free N-connector has been specially developed for Ecoflex 10 Plus. The connector installation only takes a few minutes and doesn‘t require any special tools. Ecoflex 10 Plus is the right choice when a low loss, highly flexible microwave rated cable is required.
Available standard lengths 25 m, 50 m, 100 m, 200 m, 500 m.

 

Diameter ............................................     ......... 10,2 mm
Impedance ........................................................ 50
Attenuation @ 1 GHz/100m............................ 14,0 dB
fmax ....................................................    ........... 8 GHz

 


available connectors for 10 mm cables
 

 

Technical data
Centre conductor Hybrid, aluminium core 7 x 1,0 mm
Centre conductor Ø 2,85 mm
Dielectric PE, low-loss Compound
Dielectric Ø 7,25 mm
Outer conductor 1 copperfoil, PE-coated
Shielding factor 100 %
Outer conductor 2 copper braid
optical shielding factor 72 %
Sheath black PVC, UV-resistant
Outer diameter Ø 10,2 mm
Weight 103 g/m
Min. bending radius one single bending .40 mm
15 repeated bendings 80 mm
Temperature range storage  -70 to +85°C
Temperature range installation -40 to +60°C
Temperature range operation -55 to +85°C
Pulling strength 40 N
   

 

Electrical specifications
Electrical specifications 50 Ohm
Capacity 78 pF/m
Velocity factor 0,85
fmax 8 GHz
Screening efficiency @ 1 GHz > 90 dB
DC-resistance:  
   Centre conductor 5,4 Ohm/km
   Outer conductor 8,4 Ohm/km
RF peak voltage 1kV
   

 

Attenuation (dB/100 m)Attenuation (dB/100 m 20°C)
5 MHz 0,9 dB
10 MHz 1,3 dB
50 MHz 2,85 dB
100 MHz 4,1 dB
144 MHz 5,0 dB
200 MHz 5,9 dB
300 MHz 7,4 dB
432 MHz 8,9 dB
500 MHz 9,6 dB
800 MHz 12,4 dB
1000 MHz 14,0 dB
1296 MHz 16,2 dB
1500 MHz 17,6 dB
1800 MHz 19,5 dB
2000 MHz 20,6 dB
2400 MHz 22,9 dB
3000 MHz 26,0 dB
4000 MHz 30,7 dB
5000 MHz 35,1 dB
6000 MHz 39,1 dB
8000 MHz 46,6 dB

 

Max. power handling (W @ 40°C)
     10 MHz 3860 Watt
   100 MHz 1190 Watt
   500 MHz 510 Watt
 1000 MHz 350 Watt
 2000 MHz 240 Watt
 3000 MHz 190 Watt
 4000 MHz 160 Watt
 5000 MHz 140 Watt
 6000 MHz 130 Watt

 Informations: SSB-Electronic GmbH

 

Händleranfragen für unsere Produkte erwünscht.
Wir erstellen Ihnen gern individuelle Angebote.

Dealer enquiries wanted. We would like to prepare
individual quotations for you.

Si vous êtes commerçant(e), nous proposons de vous
soumettre une offerte individuelle.

Per i commercianti abbiamo offerte speciali.